Configuring settings
After installing and connecting the USB device server to the machine, configure the machine
settings.
• When using the USB device server, set [Energy Saver Mode to Disable Print Server] to [Disable
Mode] to prevent the machine from entering Energy Saver mode. Otherwise, the USB device
server loses communication with the network while the machine is in Energy Saver mode, and the
machine cannot receive print jobs.
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Machine Features].
4. Press [System Settings].
5. Press [Administrator Tools].
6. Press [ Next] four times.
7. Press [Energy Saver Mode to Disable Print Server].
8. Press [Disable Mode].
9. Press [OK].
10. Press [User Tools] ( ) on the top right of the screen.
11. Press [Home] ( ) at the bottom of the screen in the center.
Installing the File Format Converter
1. Check the contents of the package.
2. Turn the machine off and unplug the power cord.
3. Loosen the two screws and remove the slot cover.
The removed cover will not be reused.
Installing Options
39