Ricoh P C200W - Attaching Cables

Set up, install, and configure 20
• Allow the following recommended amount of space around the printer for proper ventilation:
1
Top
101 mm (4 in.)
2
Rear
102 mm (4 in.)
3
Right side
76 mm (3 in.)
4
Front
76 mm (3 in.)
5
Left side
76 mm (3 in.)
Attaching cables
CAUTION—SHOCK HAZARD: To avoid the risk of electrical shock, do not set up this product or make any
electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning storm.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an
appropriately rated and properly grounded electrical outlet that is near the product and easily accessible.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, use only the power cord
provided with this product or the manufacturer's authorized replacement.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch the USB cable, any
wireless network adapter, or the printer in the areas shown while actively printing.
3
2
1
5
4