Ricoh P C200W - Ipsec

Use printer menus 66
Menu item
Description
SNMP Version 3
Enabled
Off
On*
Set Read/Write Credentials
User Name
Privacy Password
Authentication Password
Set Read-only Credentials
User Name
Privacy Password
Authentication Password
Authentication Hash
MD5
SHA1*
Minimum Authentication Level
No Authentication, No Privacy
Authentication, No Privacy
Authentication, Privacy*
Privacy Algorithm
DES
AES-128*
Configure SNMP version 3 to install and update the printer security.
Note: An asterisk (*) next to a value indicates the factory default setting.
IPSec
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
Description
Enable IPSec
Off*
On
Enable Internet Protocol Security (IPSec).
Base Configuration
Default*
Compatibility
Secure
Set the IPSec base configuration.
Note: This menu item appears only when Enable IPSec is set to On.