Ricoh P C200W - Wireless

Use printer menus 58
Wireless
Menu item
Description
Setup On Printer Panel
Choose Network
Add Wi-Fi Network
• Network Name
• Network Mode
Infrastructure
• Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
Determine the wireless network that the printer connects to.
Note: This menu item appears as Wireless Connection Setup in the
Embedded Web Server.
Wi-Fi Protected Setup
Start Push Button Method
Start PIN Method
Establish a wireless network and enable network security.
Notes:
• Start Push Button Method connects the printer to a wireless network
when buttons on both the printer and the access point (wireless
router) are pressed within a given time.
• Start PIN Method connects the printer to a wireless network when a
PIN on the printer is entered into the wireless settings of the access
point.
Compatibility
802.11b/g/n (2.4GHz)
802.11a/b/g/n/ac (2.4GHz/5GHz)*
802.11a/n/ac (5GHz)
Specify the wireless standard for the wireless network.
Wireless Security Mode
Disabled*
WEP
WPA2/WPA-Personal
WPA2-Personal
802.1x - RADIUS
Set the type of security for connecting the printer to wireless devices.
WEP Authentication Mode
Auto*
Open
Shared
Set the type of Wireless Encryption Protocol (WEP) used by the printer.
Note: This menu item appears only if Wireless Security Mode is set to
WEP.
Set WEP Key
Specify a WEP password for secure wireless connection.
Note: This menu item appears only if Wireless Security Mode is set to
WEP.