Ricoh P C200W User Manual

Use printer menus 59
Menu item
Description
WPA2-Personal
AES*
Enable wireless security through WPA2.
Note: This menu item appears only if Wireless Security Mode is set to
WPA2-Personal.
Set PSK
Set the password for secure wireless connection.
Note: This menu item appears only if Wireless Security Mode is set to
WPA2/WPA-Personal or WPA2-Personal.
WPA2/WPA-Personal
AES*
Enable wireless security through WPA2/WPA.
Note: This menu item appears only if Wireless Security Mode is set to
WPA2/WPA-Personal.
802.1x Encryption Mode
WPA+
WPA2*
Enable wireless security through 802.1x standard.
Note: This menu item appears only if Wireless Security Mode is set to
802.1x - Radius.
IPv4
Enable DHCP
On*
Off
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to distribute IP
addressing and configuration information dynamically to clients.
IPv4
Set Static IP Address
IP Address
Netmask
Gateway
Set the static IP address of your printer.
IPv6
Enable IPv6
On*
Off
Enable IPv6 in the printer.
IPv6
Enable DHCPv6
On
Off*
Enable DHCPv6 in the printer.
IPv6
Stateless Address Autoconfiguration
Off
On*
Set the network adapter to accept the automatic IPv6 address
configuration entries provided by a router.
IPv6
DNS Address
Specify the DNS server address.

Ricoh P C200W Specifications

General

Brand	Ricoh
Model	P C200W
Category	Printer
Language	English