Ricoh P C200W - Wi-Fi Direct; Ethernet

Use printer menus 61
Wi-Fi Direct
Menu item
Description
Enable Wi-Fi Direct
On
Off*
Set the printer to connect directly to Wi-Fi devices.
Wi-Fi Direct Name
Specify the name of the Wi-Fi Direct network.
Wi-Fi Direct Password
Set the password to authenticate and validate users on a Wi-Fi
connection.
Show Password on Setup Page
Off
On*
Show the Wi-Fi Direct Password on the Network Setup Page.
Preferred Channel Number
1–11
Auto*
Set the preferred channel of the Wi-Fi network.
Group Owner IP Address
Specify the IP address of the group owner.
Auto-Accept Push Button Requests
Off*
On
Accept requests to connect to the network automatically.
Note: Accepting clients automatically is not secured.
Note: An asterisk (*) next to a value indicates the factory default setting.
Ethernet
Menu item
Description
Network Speed
Show the speed of an active network adapter.
IPv4
Enable DHCP
On*
Off
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to distribute IP addressing
and configuration information to clients in a dynamic manner.
IPv4
Set Static IP Address
IP Address
Netmask
Gateway
Set the static IP address of your printer.