Ricoh P C200W - Network;Ports; Network Overview

Use printer menus 57
Network/Ports
Network Overview
Menu item
Description
Active Adapter
Auto*
Standard Network
Wireless
Specify how a network is connected.
Network Status
Show the printer network status and connectivity settings.
Display Network Status on Printer
Off
On*
Show the network status on the display.
Speed, Duplex
Show the speed of the currently active network card.
IPv4
Show the IPv4 address.
All IPv6 Addresses
Show all IPv6 addresses.
Reset Print Server
Start
Reset all active network connections to the printer.
Note: This setting removes all network configuration settings.
Network Job Timeout
Disabled
Enabled*
Set the time before the printer cancels a network print job.
Note: Network Job Timeout Time appears only in some printer models.
Network Job Timeout Time
10–255 seconds (90*)
Banner Page
Off*
On
Print a banner page.
Enable Network Connections
Enable*
Disable
Enable or disable all network connections.
Enable LLDP
On
Off*
Enable Link Layer Discovery Protocol (LLDP) in the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.