Ricoh P C200W User Manual

Use printer menus 70
USB
Menu item
Description
PCL SmartSwitch
Off
On*
Set the printer to switch to PCL emulation when a print job received through a USB
port requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming data
and uses the default printer language specified in the Setup menu.
PS SmartSwitch
Off
On*
Set the printer to switch to PS emulation when a print job received through a USB
port requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming data and
uses the default printer language specified in the Setup menu.
Mac Binary PS
On
Auto*
Off
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
• When set to On, the printer processes raw binary PostScript print jobs from
computers using the Macintosh operating system.
• When set to Auto, the printer processes print jobs from computers using either
Windows or Macintosh operating systems
• When set to Off, the printer filters PostScript print jobs using the standard
protocol.
Enable USB Port
Disable
Enable*
Enable the standard USB port.
Note: An asterisk (*) next to a value indicates the factory default setting.
Restrict external network access
Menu item
Description
Restrict external network
access
Off*
On
Restrict access to network sites.
External network address
Specify the network addresses with restricted access.
E-mail address for notification
Specify an e-mail address to send a notification of logged events.
Ping frequency
1–300 (10*)
Specify the network query interval in seconds.
Subject
Specify the subject and message of the notification e-mail.
Message
Note: An asterisk (*) next to a value indicates the factory default setting.

Ricoh P C200W Specifications

General

Brand	Ricoh
Model	P C200W
Category	Printer
Language	English