Ricoh P C200W - Paper; Tray Configuration; Media Configuration

Use printer menus 55
Paper
Tray Configuration
Menu item
Description
Default Source
Tray [x] (1*)
Manual Paper
Manual Envelope
Set the paper source for all print jobs.
Paper Size/Type
Tray [x] (1*)
Manual Paper
Manual Envelope
Specify the paper size or paper type loaded in each paper source.
Substitute Size
Off
Letter/A4
All Listed*
Set the printer to substitute a specified paper size if the requested size is not loaded
in any paper source.
Notes:
• Off prompts the user to load the required paper size.
• Letter/A4 prints an A4-size document on letter when loading letter, and letter-
size jobs on A4 paper size when loading A4.
• All Listed substitutes Letter/A4.
Note: An asterisk (*) next to a value indicates the factory default setting.
Media Configuration
Universal Setup
Menu item
Description
Units of Measure
Inches
Millimeters
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Portrait Width
3.00–14.17 inches (8.50*)
76–360 mm (216*)
Set the portrait width of the universal paper.
Portrait Height
3.00–14.17 inches (14*)
76–360 mm (356*)
Set the portrait height of the universal paper.