Ricoh P C200W User Manual

Use printer menus 62
Menu item
Description
IPv6
Enable IPv6
Off
On*
Enable IPv6 in the printer.
IPv6
Enable DHCPv6
Off*
On
Enable DHCPv6 in the printer.
IPv6
Stateless Address
Autoconfiguration
Off
On*
Set the network adapter to accept the automatic IPv6 address configuration entries
provided by a router.
IPv6
DNS Address
Specify the DNS server address.
IPv6
Manually Assigned IPV6
Address
Assign the IPv6 address.
Note: This menu item appears only in some printer models.
IPv6
Manually Assigned IPV6 Router
Assign the IPv6 router address.
Note: This menu item appears only in some printer models.
IPv6
Address Prefix
0–128 (64*)
Specify the address prefix.
IPv6
All IPv6 Addresses
Show all IPv6 addresses.
IPv6
All IPv6 Router Addresses
Show all IPv6 router addresses.
Network Address
UAA
LAA
Show the printer Media Access Control (MAC) addresses: Locally Administered
Address (LAA) and Universally Administered Address (UAA).
Note: You can change the printer LAA manually.
PCL SmartSwitch
Off
On*
Set the printer to switch automatically to PCL emulation when a print job requires it,
regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming data
and uses the default printer language specified in the Setup menu.

Ricoh P C200W Specifications

General

Brand	Ricoh
Model	P C200W
Category	Printer
Language	English