Ricoh P C200W - Page 75

Use printer menus 75
Menu item
Description
Default Print Permission Login
Shows the default permission used for the user to print.
Note: This setting shows only when one or more Login Methods are created.
Security Reset Jumper
Enable “Guest” access*
No Effect
Specify user access to the printer.
Notes:
• The jumper is located beside a lock icon on the controller board.
• Enable “Guest” access gives anyone access to all aspects of the printer.
• No Effect may make access to the printer impossible when the required security
information is unavailable.
Minimum Password Length
0–32
Specify the password length.
Enable Password/PIN Reveal
Show the password or personal identification number.
Note: This menu item is available only in some printer models.
Note: An asterisk (*) next to a value indicates the factory default setting.