Ricoh PE-P4 - Page 146

2nd Transfer
Media Type
Sets the Media type.
*Plain paper, Thin Paper, Thick Paper 2, Thick Paper 1,
Envelope, Cardstock, Bond Paper, Label Paper,
Prepunched, Preprinted, Letterhead, Color Paper,
Recycled Paper, Middle Thick
2nd Front
Adjusts the transfer roller current, based on the default
value.
[-15 to 15 / 0 (Default) / 1 A/step]
2nd Back
Adjusts the transfer roller current, based on the default
value.
[-15 to 15 / 0 (Default) / 1 A/step]
Fuser Temp.
Adjusts the temperature of the fusing unit, based on the
default value.
[-30 to 0 / 0 (Default) / 2°C/step]
5. System Maintenance Reference
144