Ricoh PE-P4 - Waste Toner Bottle Set Sensor

4. Disconnect CN306 on the EGB. ( × 1)
5. Remove all the AIO cartridges (page 62 "AIO Cartridge").
6. Image Transfer Belt Unit (page 68 "Image Transfer Belt Unit")
7. Harness cover [A] (hook)
8. TM sensor base [B]
Waste Toner Bottle Set Sensor
1. Rear cover (page 32 "Rear Cover")
2. Controller box cover (page 99 "Controller Board")
3. Only for MF models: FCU and Speaker bracket (page 99 "Controller Board")
4. Disconnect CN315 on the EGB
Image Transfer
75