Ricoh PE-P4 - Fax Error Clear Principle (Only for MF Models)

Fax Error Clear Principle (only for MF Models)
RX
1. When the RX communication Error occurs, the display shows "RX Comm Error".
2. During the display shows "RX Comm Error", any job can be accepted same as the normal status.
3.
The "RX Comm Error" to be cleared by receiving any jobs (Fax, Copy, Print, Scan) or pressing any
button.
TX
1. When the TX communication Error occurs, the display shows the "TX Comm Error".
2. If the auto redial is on, This machine (M203/M204) retry the TX, This machine (M203/M204)
doesn't show the error message during the retry.
•
If the retry finish successfully, then return to the normal status.
• If the retry fail as the number set by user, the message remains as "TX Comm Error".
• If the auto redial is off, the message is remain.
3. During the display shows "TX Comm Error", any job can be accepted same as the normal status.
4. The "TX Comm Error" to be cleared by receiving any jobs (Fax, Copy, Print, Scan) or pressing any
button.
6. Troubleshooting
182