Specifying the SSL/TLS Encryption Mode
This can be specified by the network administrator. For details about logging in and logging out with
administrator authentication, see p.30 "Logging in Using Administrator Authentication" and p.32 "Logging
out Using Administrator Authentication".
After installing the device certificate, specify the SSL/TLS encrypted communication mode. By making this
setting, you can change the security level.
1. Press the [User Tools] key.
2. Press [System Settings].
3. Press [Interface Settings].
4. Press [Permit SSL / TLS Communication].
If this item is not visible, press [ Next] to display more settings.
5. Select the encrypted communication mode.
Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext / Cleartext] as the encrypted
communication mode.
6. Press [OK].
7. Press the [User Tools] key.
Protection Using Encryption
163
To Next Page
Loading...
