Ricoh Pro C751EX - Settings You Can Configure Using Web Image Monitor

Menu Tab Item Setting
System
Settings
Administrator
Tools
Machine Data
Encryption Settings
Select [Encrypt], and then select [All Data]
for "Carry over all data or file system data
only (without formatting), or format all
data"
If [Encrypt] is already selected, further
encryption settings are not necessary.
See p.100 "Encrypting Data on the Hard
Disk".
Scanner
Features
Initial Settings Menu Protect Level 2
See p.118 "Menu Protect".
• The SNMP setting can be specified in [SNMP] under [Configuration] in Web Image Monitor.
Settings You Can Configure Using Web Image Monitor
Use Web Image Monitor to configure the security settings shown in the following table.
Category Item Setting
Device Settings/
Logs
Collect Job Logs Active
Device Settings/
Logs
Collect Access Logs Active
Security/User
Lockout Policy
Lockout Active
Security/User
Lockout Policy
Number of Attempts before
Lockout
5 times or less.
See p.68 "User Lockout Function".
Security/User
Lockout Policy
Lockout Release Timer Set to Active or Inactive. When setting to Active, set
the Lockout release timer to 60 minutes or more.
See p.68 "User Lockout Function".
Security/User
Lockout Policy
Lock Out User for When setting "Lockout Release Timer" to[ Active],
set the Lockout release timer to 60 minutes or more.
See p.68 "User Lockout Function".
8. Specifying the Extended Security Functions
204
8