4. Click [Configuration], and then click [Logs] under "Device Settings".
5. Select [Active] under "Encrypt Logs".
To disable log encryption, select [Inactive].
If other changes have been made in related log settings, they will occur at the same time.
6. Click [OK].
7. Click [OK].
8. Click [Logout].
• In order to enable encryption, either "Collect Job Logs" or "Collect Access Logs", or both must be set
to [Active].
• If the data stored in the machine has been encrypted, the log files will still be encrypted, regardless
of this setting.
Deleting all logs
Use the following procedure to delete all logs stored in the machine.
1. Open a Web browser.
2. Enter " http://(the machine's IP address or host name)/" in the address bar.
3. Click [Login].
The machine administrator can log in.
Enter the login user name and login password.
4. Click [Configuration], and then click [Logs] under "Device Settings".
5. Click [Delete] under "Delete All Logs".
6. Click [OK].
7. Click [OK].
8. Click [Logout].
• On this page, "Delete All Logs" does not appear if either "Collect Job Logs" or "Collect Access Logs"
are not set to [Active].
Downloading logs
Use the following procedure to convert the logs stored in the machine into a CSV file for simultaneous batch
download.
1. Open a Web browser.
6. Managing Access to the Machine
126
To Next Page
Loading...
