8. Press [Change] for "Login User Name".
9. Enter the login user name, and then press [OK].
10. Press [Change] for "Login Password".
11. Enter the login password, and then press [OK].
12. If a password reentry screen appears, enter the login password, and then press [OK].
13. Press [OK] twice.
You will be automatically logged out.
14. Press the [User Tools] key.
Resetting the Administrator's Password
This section describes how to reset the administrators' passwords. Administrator login names cannot be
changed.
1. Press the [User Tools] key.
2. Press the [Login/Logout] key.
3. Log in as the supervisor.
For details about logging in as the supervisor, see p.231 "Logging in as the Supervisor".
4. Press [System Settings].
5. Press [Administrator Tools].
6. Press [Program / Change Administrator].
If this item is not visible, press [ Next] to display more settings.
Supervisor Operations
233
To Next Page
Loading...
