Creating the Server Certificate
After installing Internet Information Services (IIS) and Certificate services Windows components, create the
Server Certificate as follows:
Windows Server 2008 R2 is used to illustrate the procedure.
1. On the [Start] menu, point to [Administrator Tools], and then click [Internet Information
Services (IIS) Manager].
2. In the left column, click the server name, and then double-click [Server Certificates].
3. In the right column, click [Create Certificate Request...].
4. Enter all the information, and then click [Next].
5. In "Cryptographic service provider:", select a provider, and then click [Next].
6. Click [...], and then specify a file name for the certificate request.
7. Specify a location in which to store the file, and then click [Open].
8. Close [Internet Information Services (IIS) Manager] by clicking [Finish].
Installing the Device Certificate (Issued by a Certificate Authority)
Use this procedure to install the device certificate issued by a certificate authority.
1. Open a Web browser.
2. Enter "http://(the machine's IP address or host name)/" in the address bar.
3. Click [Login].
The network administrator can log in.
Enter the login user name and password.
4. Click [Configuration], and then click [Device Certificate] under [Security].
5. Check the radio button next to the number of the certificate you want to install.
6. Click [Install].
7. Enter the contents of the device certificate.
In the certificate box, enter the contents of the device certificate issued by the certificate authority.
For details about the displayed items and selectable items, see Web Image Monitor Help.
8. Click [OK].
9. Wait a moment for the device to restart, and then click [OK].
"Installed" appears under "Certificate Status" to show that a device certificate for the machine has
been installed.
10. Click [OK].
3. Configuring User Authentication
52
To Next Page
Loading...
