10. Appendix
Supervisor Operations
The supervisor can delete an administrator's password and specify a new one.
If any of the administrators forgets their password or if any of the administrators changes, the supervisor
can assign a new password. If logged in using the supervisor's user name and password, you cannot use
normal functions or specify defaults.
Log in as the supervisor only to change an administrator's password.
• The default login user name is "supervisor" and the login password is blank. We recommend changing
the login user name and login password.
• When registering login user names and login passwords, you can specify up to 32 alphanumeric
characters and symbols. Keep in mind that user names and passwords are case-sensitive.
• User names cannot contain numbers only, a space, colon (:), or quotation mark ("), nor can they be
left blank. For details about characters that the password can contain, see p.191 "Specifying the
Extended Security Functions".
• Be sure not to forget the supervisor login user name and login password. If you do forget them, a
service representative will have to return the machine to its default state. This will result in all data in
the machine being lost and the service call may not be free of charge.
• You cannot specify the same login user name for the supervisor and the administrators.
• Using Web Image Monitor, you can log in as the supervisor and delete an administrator's password
or specify a new one.
Logging in as the Supervisor
1. Press the [User Tools] key.
2. Press the [Login/Logout] key.
3. Press [Login].
4. Enter a login user name, and then press [OK].
When you assign the administrator for the first time, enter "supervisor".
5. Enter a login password, and then press [OK].
When the supervisor is making settings for the first time, a password is not required; the supervisor
can simply press [OK] to proceed.
231
To Next Page
Loading...
