2. Select the file.
3. Press [Edit File].
4. Press [Change Password].
5. Enter the password using the number keys.
You can use 4 to 8 numbers as the password for the stored file.
6. Press [OK].
7. Confirm the password by re-entering it using the number keys.
8. Press [OK].
The icon appears next to a stored file protected by password.
9. Press [OK].
Unlocking Files
If you specify "Enhance File Protection", the file will be locked and become inaccessible if an invalid
password is entered ten times. This section explains how to unlock files.
"Enhance File Protection" is one of the extended security functions. For details about this and other extended
security functions, see p.191 "Specifying the Extended Security Functions".
Only the file administrator can unlock files.
Configuring Access Permissions for Stored Files
85
To Next Page
Loading...
