Ricoh Pro C751EX - Logging out as the Supervisor; Changing the Supervisor

The message, "Authenticating... Please wait." appears.
Logging out as the Supervisor
If administrator authentication has been specified, be sure to log out after completing settings.
1. Press the [Login/Logout] key.
2. Press [Yes].
Changing the Supervisor
To do this, you must enable the user administrator's privileges through the settings under "Administrator
Authentication Management". For details, see p.26 "Specifying Administrator Privileges".
1. Press the [User Tools] key.
2. Press the [Login/Logout] key.
3. Log in as the supervisor.
For details about logging in as the supervisor, see p.231 "Logging in as the Supervisor".
4. Press [System Settings].
5. Press [Administrator Tools].
6. Press [Program / Change Administrator].
If this item is not visible, press [ Next] to display more settings.
7. Under "Supervisor", press [Change].
10. Appendix
232
10