Limiting Machine Operations to Customers Only
The machine can be set so that operation is impossible without administrator authentication.
The machine can be set to prohibit operation without administrator authentication and also prohibit remote
registration in the Address Book by a service representative.
We maintain strict security when handling customers' data. Administrator authentication prevents us from
operating the machine without administrator permission.
Use the following settings.
• Service Mode Lock
Settings
This can be specified by the machine administrator. For details about logging in and logging out with
administrator authentication, see p.30 "Logging in Using Administrator Authentication" and p.32 "Logging
out Using Administrator Authentication".
Service Mode Lock
Service mode is used by a service representative for inspection or repair. If you set "Service Mode
Lock" to [On], service mode cannot be used unless the machine administrator logs on to the machine
and cancels the service mode lock to allow the service representative to operate the machine for
inspection and repair. This ensures that the inspection and repair are done under the supervision of
the machine administrator.
Specifying Service Mode Lock
1. Press the [User Tools] key.
2. Press [System Settings].
3. Press [Administrator Tools].
4. Press [Service Mode Lock].
Limiting Machine Operations to Customers Only
199
To Next Page
Loading...
