Error Code Cause Solution
W0406-104
4. Cannot resolve the domain
name.
Specify the IP address in the
domain name and confirm that
authentication is successful.
If authentication was
unsuccessful:
1. Make sure that Restrict LM/
NTLM is not set in either
"Domain Controller Security
Policy" or "Domain Security
Policy".
2. Make sure that the ports for
the domain control firewall and
the firewall on the machine to
the domain control connection
path are open.
If you are using the Windows
firewall, open the Properties
window for "Network
Connections", and then click
"Settings" on the "Advanced"
tab. On the "Exceptions" tab,
specify ports 137 and 139 as
exceptions.
In the Properties window for
"Network Connections", open
TCP/IP properties. Then click
detail settings, WINS, and then
check the "Enable NetBIOS
over TCP/IP" box and set
number 137 to "Open".
9. Troubleshooting
216
To Next Page
Loading...
