3. Press [Administrator Tools].
4. Press [User Authentication Management].
If this item is not visible, press [ Next] to display more settings.
5. Select [LDAP Auth.].
6. Select the LDAP server to be used for LDAP authentication.
7. Select which of the machine's functions you want to permit.
If this item is not visible, press [ Next] to display more settings.
LDAP authentication will be applied to the selected functions.
Users can use the selected functions only.
For details about specifying available functions for individuals or groups, see p.122 "Limiting
Available Functions".
3. Configuring User Authentication
56
To Next Page
Loading...
