14. Under "Group Name", press [Change], and then enter the group name.
15. Press [OK].
16. Select which of the machine's functions you want to permit.
Authentication will be applied to the selected functions.
Users can use the selected functions only.
For details about specifying available functions for individuals or groups, see p.122 "Limiting
Available Functions".
17. Press [OK].
18. Press [On] for "Use Secure Connection (SSL)", and then press [OK].
To not use secure sockets layer (SSL) for authentication, press [Off].
3. Configuring User Authentication
62
To Next Page
Loading...
