3. Make sure there is space between the sheets.
4. Hold the stack of paper in both hands and tap the long and short edges of the paper
against a flat surface to align them.
Loading Paper into Trays 1, 2, and the Wide Large Capacity Tray
Each paper tray is loaded in the same way. The wide LCT is identified as Tray 3, Tray 4, Tray 5, Tray 6,
Tray 7, and Tray 8.
• Check the paper edges are aligned at the left side.
2. Paper Specifications and Adding Paper
72
To Next Page
Loading...
