Ricoh Pro C9500 - Ejecting the Paper Jammed in the Post Processor Unit Automatically

DFG010
• Open the trimmer front
cover.
• Turn lever Rt1 to the
right, and then remove
misfed paper.
• Return lever Rt1 to its
original position.
• Remove misfed paper
from the trimmer tray.
• Return lever Rt2 to its
original position.
• Close the trimmer front
cover.
• Hold down lever Rt2
and remove misfed
paper.
Ejecting the Paper Jammed in the Post Processor Unit Automatically
You can specify to eject the jammed paper onto the specified tray automatically, and proceed with
printing when a paper jam occurs in the finisher, booklet finisher, or high-capacity stacker.
1. Press [Printer Adjustment] hub 03 | [Machine: Paper Feed/Output] 0302:
[Remaining Paper Output Tray When Misfeed Occurs].
On the item with displayed to its left, click to display its subordinate items.
M0EDPM7385
2. Specify [On] on the tray to which you want to eject the jammed paper.
M0EDPM7386
3. Press [OK].
• The jammed paper may not be ejected depending on its condition even if you enable this setting.
6. Troubleshooting
248