Turning On and Off the Power
To turn the machine on and off, press the main power switch on the top left of the machine.
• Do not push the main power switch repeatedly.
• When you push the main power switch, wait at least 10 seconds after it is confirmed that the main
power indicator has lit up or gone out.
• If the main power indicator does not light up or go out in 15 minutes after you push the main power
switch, contact your service representative.
• Confirm how much power the options draw, and then plug them into an outlet that is nearby but
separate from the outlet that the main machine is plugged into.
• This machine automatically enters Low Power mode (Standby for Printing Priority), Low Power
mode (Energy Saving Priority) or Sleep mode if you do not use it for a while. For details, see
page 15 "Energy Saving Mode".
• When the power of the DFE is set to synch with the power of the machine, turning the power of the
machine on or off also turns the power of the DFE on or off. Turn on the power of the machine first,
and then turn on the power of the DFE if the power of the DFE is not set to synch with the machine.
To turn off the power of the machine and DFE, turn off the power of the DFE first, and then turn off
the machine.
Turning On the Main Power
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Open the main power switch cover, and then push the main power switch.
The main power indicator goes on.
1. Getting Started
14
To Next Page
Loading...
