Checking the System Information
Click [Home] to display the main page of Web Image Monitor. You can check the current system
information on this page.
This page contains three tabs: [Status], [Counter], and [Machine Information].
Status Tab
Item Description
Model Name Shows the name of the machine.
Location Shows the location of the machine as registered on the [SNMP] page.
Contact Shows the contact information of the machine as registered on the [SNMP]
page.
Host Name Shows the host name specified in [Host Name] on the [DNS] page.
Device Status Shows the current messages on the machine's display.
Toner
Item Description
Black Shows the amount of black toner remaining.
Magenta Shows the amount of magenta toner remaining.
Yellow Shows the amount of yellow toner remaining.
Cyan Shows the amount of cyan toner remaining.
Waste Toner Bottle Shows the remaining life of the waste toner bottle, as "Status OK", "Almost
Full" or "Full".
Intermediate Transfer
Unit
Shows the remaining life of the intermediate transfer unit, as "Status OK",
"Replacement Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Fusing Unit Shows the remaining life of the fusing unit, as "Status OK", "Replacement
Required Soon" or "Replacement Required".
For replacing, contact your sales or service representative.
Checking the System Information
99
To Next Page
Loading...
Need help?
General