Print Quality Problems
Checking the Condition of the Machine
If there is a problem with the quality of printing, first check the condition of the machine.
Possible Cause Solution
There is a problem with the
machine's location.
Make sure that the machine is on a level surface. Place the
machine where it will not be subject to vibration or shock.
Unsupported types of paper is used. Make sure that the paper being used is supported by the
machine. See page 41 "Supported Paper".
The paper type setting is incorrect. Make sure that the paper type setting of the printer driver
matches the type of paper loaded. See page 39 "Specifying
Paper Type and Paper Size Using the Printer Driver".
A non-genuine print cartridge is
being used.
Refilled or non-genuine print cartridge reduces print quality
and can cause malfunctions. Use genuine print cartridge only.
An old print cartridge is being used. Print cartridge should be opened before their expiration date
and used within six months of being opened.
The machine is dirty. See page 127 "Maintaining the Machine", and clean the
machine as required.
Color degradation has occurred. Color degradation may occur in color printing after the
machine is moved or a large number of pages are printed. In
this case, adjust color registration by executing [Color Dens/
Reg] in [Maintenance].
Print Quality Problems
169
To Next Page
Loading...
Need help?
General