2. Disconnect the USB cable from the machine.
When PictBridge Printing Does Not Work
This section explains likely causes and possible solutions for problems that can occur during PictBridge
printing.
Problem Cause Solution
PictBridge is not available. There is a problem with the USB
connection or the PictBridge
settings.
Use the following procedure to
check the connection and
settings:
1. Disconnect and then
reconnect the USB cable.
2. Check the PictBridge
settings are enabled.
3. Disconnect the USB cable,
and then turn off the
machine. Turn the machine
back on. When the
machine has fully booted
up, reconnect the USB
cable.
When two or more digital
cameras are connected, the
second and subsequent
cameras are not recognized.
You have connected multiple
digital cameras.
Connect one digital camera
only.
Do not connect multiple
cameras.
Cannot print. The specified number of prints
exceeds the maximum number
that can be printed at a time.
The maximum specifiable print
quantity at a time is 999.
Change the quantity to 999 or
less, and then retry printing.
3. Printing Documents
68
To Next Page
Loading...
Need help?
General