14. Press the [ ] or [ ] key to select [Wi-Fi Config.], and then press the [OK] key.
15. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key.
16. Press the [ ] or [ ] key to select [PIN], and then press the [OK] key.
17. Check the PIN code.
18. Enter the machine’s PIN code (8 digits) on the router (access point)’s web page.(The web
page accessed in Step 2
19. Execute WPS (PIN system) from the router (access point)’s web page.
20. Check the result.
• Connection has succeeded:
Press the [Menu] key
Configuring the Wi-Fi settings is complete.
• Connection has failed:
Press the [Back] key to return to the screen displayed in Step 16. Check the configuration for
the router (access point), then try the connection again.
8. Configuring Network Settings Using OS X
188
To Next Page
Loading...
