1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Paper Input], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Paper Size], and then press the [OK] key.
4. Press the [ ] or [ ] key to select the paper size setting for the desired tray, and then press
the [OK] key.
5. Press the [ ] or [ ] key to select [Custom Size], and then press the [OK] key.
6. Press the [ ] or [ ] key to select [mm] or [inch], and then press the [OK] key.
7. Enter the width using the [ ] or [ ] key, and then press the [OK] key.
8. Enter the length using the [ ] or [ ] key, and then press the [OK] key.
9. Press the [Menu] key to return to the initial screen.
Specifying Paper Type and Paper Size Using the Control Panel
37
To Next Page
Loading...
Need help?
General