Selects whether to enable or disable IPsec.
Default: [Inactive]
• Inactive
• Active
• MAC Address
Displays the machine's MAC address.
• Wi-Fi Config.
• Wi-Fi
Select whether to enable or disable Wireless LAN.
Default: [Inactive]
• Inactive
• Active
If [Inactive] is set, [Wi-Fi Status], [MAC Address], [Currnt Connectn], [Setup Wizard],
and [WPS] are not displayed.
• Connection Mode
Displays the current connection mode.
Default: [Ethernet]
• Ethernet
• Wi-Fi
• Wi-Fi Status
Displays the current connection status.
• MAC Address
Displays the machine's MAC address.
• Currnt Connectn
Displays detailed information about the connection, such as the SSID and the wireless
signal strength.
• Setup Wizard
Displays the procedure for manually connecting to a wireless LAN. It leads you step-by-
step through configuring the settings for connecting with a wireless LAN.
• WPS
Connects with one touch using WPS (Wi-Fi Protected Setup). For details, see Setup
Guide.
• Wi-Fi Direct
Displays the current SSID of the machine.
Host Interface Menu
87
To Next Page
Loading...
