1.Detailed Descriptions
43
Saddle Stitching with This Finisher
Previously, strong pressure had to be applied in order to shape the saddle; this could only be possible if
the finisher is big. This finisher uses the method below to make a saddle without having to be large in
size.
1. Pressure is applied to the fold with a roller to form the saddle.
2. Pressure is applied while the paper is buckled at the top and bottom with two rollers to form the
saddle. The rollers move to front and back to strengthen the crease with two folds, not just one fold.
Components
To Next Page
Loading...
