Need help?Do you have a question about the Ricoh SR3270 and is the answer not in the manual?
General| Model Name | SR3270 |
|---|---|
| Type | Finisher |
| Stack Capacity | 3, 000 sheets |
| Punching | Optional |
| Sheet Capacity | 3, 000 sheets |
| Staple Capacity | 50 sheets |
| Staple Positions | Top, Bottom, 2 Staples |
| Function | Stapling, Stacking |
Defines symbols and abbreviations used throughout the manual for clarity and consistency.
Lists registered trademarks and trademarks of various software and hardware companies.
Highlights modifications and improvements made compared to previous versions of the finisher.
Provides details on service procedures related to the staple near-end detection function.
Explains the functionality and operation of the staple near-end detection system.
Describes how customers can detach and reattach the end fence of the booklet tray.
Detailed technical specifications for the Booklet Finisher SR3270.
Detailed technical specifications for the Finisher SR3260.
Diagram showing the layout of the booklet tray and related components.
Diagram illustrating the arrangement of parts within the stapler tray.
Diagram showing the layout of the shift tray and its components.
Diagram showing the layout of the paper exit guide and related parts.
Diagram showing the layout of the stapler unit.
Diagram showing the layout of the saddle stitch unit.
Lists electrical components for the paper transport system.
Details components within the shift system, including sensors and motors.
Details components of the jogger system, including motors and sensors.
Details components for the stapler and intermediate transport systems.
Details components of the stapleless stapler unit.
Details components of the paper folding system.
Lists various motors, solenoids, and drive components.
Explains the mechanism responsible for separating paper paths.
Describes proof tray transport and full detection mechanisms.
Details how the shift tray ascends, descends, and detects fullness.
Explains the lateral shifting of paper by the shift roller.
Covers booklet tray full detection and paper eject mechanisms.
Describes paper stacking, alignment, and trailing edge fence operations.
Explains the jogger operation for aligning paper width.
Details the open/close mechanism of the paper exit guide plate.
Describes how the stapler unit moves for different binding modes.
Explains the mechanism for releasing stapled paper bundles.
Details booklet stitching, bundle transport, and pressure release.
Describes the operation of the folding blade and folding rollers.
Explains the location, operation, and mechanisms of the stapleless stapler.
Details the function, counter, threshold, and control of staple near-end detection.
Describes changes from previous models and lists punch unit specifications.
Diagram showing the layout of the punch unit components.
Explains the punch unit's mechanism, skew correction, and registration.
Details settings for punch hole alignment and paper position detection.
Explains punch unit movement and the punching drive system.
Describes punch scrap collection, full detection, and the board cover.
Procedures for replacing exterior covers, trays, and guards.
Procedures for replacing key components within the main unit.
Procedures for replacing the stapleless stapler unit and stapler unit.
Procedures for removing and replacing the saddle stitch unit.
To Next Page
