Ricoh SR3270 - Punch Unit PU3080 (D3 G5); Changes from the Previous Machine; Specifications

1.Detailed Descriptions
46
Punch Unit PU3080 (D3G5)
Changes from the Previous Machine
The time required for punch unit installation has been reduced by mounting the following punch unit
parts on the finisher.
• Stay [A]
• Hopper guide plate [B]
• Harnesses [C]
Specifications
Punch unit
type
Paper size
2 & 4 holes
type: 2 holes
SEF: A3, B4 JIS, A4, B5 JIS, A5, 11 x 17, 8 1/2 x 14, 8 1/2 x 11, 5 1/2 x 8 1/2, 7 1/4
x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, 8K, 16K, 8 1/4 x 14, 8 x 10, 11 x 15, 10 x 14
2 & 4 holes
type: 2 holes
LEF: A4, B5 JIS, A5, 8 1/2 x 11, 7 1/4 x 10 1/2, 16K
2 & 4 holes
type: 4 holes
SEF: A3, B4 JIS, 11 x 17, 11 x 15, 8K
2 & 4 holes
type: 4 holes
LEF: A4, B5 JIS, 8 1/2 x 11, 7 1/4 x 10 1/2, 16K
4 holes type: 4
holes
SEF: A3, B4 JIS, A4, B5 JIS, A5, 11 x 17, 8 1/2 x 14, 8 1/2 x 11, 5 1/2 x 8 1/2, 7 1/4
x 10 1/2, 8 x 13, 8 1/2 x 13, 8 1/4 x 13, 8K, 16K, 8 1/4 x 14, 8 x 10, 11 x 15, 10 x 14
4 holes type: 4
LEF: A4, B5 JIS, A5, 8 1/2 x 11, 7 1/4 x 10 1/2, 16K