1.Detailed Descriptions
4
1. Detailed Descriptions
Changes from the Previous Machine
Throughput of Stapleless Stapler Unit Increased
The throughput of the stapleless stapler unit has been increased from 8 to 16 cpm.
The increase has been achieved by changing the Stapleless Stapler Drive Motor (DCM9) from 11W to a
20 W motor and changing the gearing (eliminating the worm gear).
Previous unit: 127.0mm×140.3mm×74mm
This unit:155.5mm×177.5mm×93.3mm
Service for Staple Near-End Detection
A holder for storing stock stapler cartridges has been added.
This stapler holder [A] is affixed to the back of the finisher's front door with double-sided tape.
To Next Page
Loading...
