20152192
12
Technical description of the burner
4.9 Test boiler
The firing rates were set in relation to special test boilers, accord-
ing to EN 676 regulations.
The burner-boiler combination does not pose any problems if the
boiler is EC type-approved.
If, however, the burner is to be used with a commercial boiler that
has not been EC approved and/or its combustion chamber di-
mensions are distinctly smaller, consult the manufacturer.
You are advised to use this burner for boilers with a frontal circu-
lation of the flue gases.
To Next Page
Loading...
