Riello 20148874 - Entering the Password

43
20152192
GB
Calibration and operation
6.7.1 Entering the password
The OEM password should be composed of 5 characters, the
technical one 4 characters.
Press the combination of keys to display CodE.
Releasing the keys, 6 bars appear, the first of which is blinking.
Press or to select a number or a letter.
Press “i/reset” to confirm. The value entered is replaced by
the minus sign (-). The next bar starts blinking.
Press or to select a number or a letter.
After entering the last character the password needs to be con-
firmed by pressing the “i/reset” key.
Press “i/reset” again to finish entering the password.
Example: The password is composed of 4 characters.
To confirm it has been entered correctly, PArA is displayed for a
maximum of 2 seconds.
Note:
To enter the password or the burner ID, the following numbers
and letters can be used:
Fig. 82
S9120
V
SD
AF
> 1 s
P
Vh
mi n
s%
V
SD
AF
Fig. 83
S9121
P
Vh
mi n
s%
Fig. 84
P
V
h
mi n
s%
S9122
S9063
/
reset
Fig. 85
Fig. 86
S9123
P
Vh
mi n s %
S9063
/
reset
Fig. 87
Fig. 88
S9124
P
V
h
mi n
s%
Fig. 89
S9125
/
reset
P
Vh
mi n s %
Fig. 90
S9126
P
Vh
mi n s %
=1 =A =L
=2 =b =n
=3 =C =o
=4 =d =P
=5 =E =r
=6 =F =S
=7 =G =t
=8 =H =u
=9 =I =Y
=0 =J
Fig. 91
S9127