Riello 20148874 - Page 51

49
20152192
GB
Calibration and operation
Press or to set the specified time.
Display: The specified time 53.361 blinks.
Alternative 1:
Alternative 2:
Press “i/reset” to go back to the modification mode.
The set value will be adopted.
Note:
To detect display errors, the value appears again but shifted by
one position to the right.
Display: Value 53.361
Press to return to the Parameter level.
Display: Parameter 224: blinks, characters ._._ do not.
P
Vhmins%
Fig. 139
S9147
S9117
ESC
Fig. 140
Delete the change!
Fig. 141
P
Vh
mi n
s%
S9144
Fig. 142
Adopt the change!
S9063
/
reset
P
Vh
mi n
s%
Fig. 143
S9152
S9117
ESC
Fig. 144
Fig. 145
P
Vh
mi n
s%
S9144
ESC
Fig. 146
S9062
On to next parameter
S9058
Goes back to the previous
parameter