Rigaku Progeny - Viewing Diagnostics Data

Advanced Options 52
1006232_RevD
Drop-Downs
Data Items
Typical Values
Descriptions
Status
Last Calibration
PASS date
FAIL date
If calibration fails, check sample and focus.
Note:
This information uses your instrument’s specified
date format.
Last Verification
PASS date
FAIL date
If verification fails, check sample and focus.
Note:
This information uses your instrument’s specified
date format.
Audit Log
Activities
Activity names
Lists the instrument status and activity data for all users
from the last instrument synchronization.
Synchronizing your instrument appends the Audit Log
data to the Audit Log archive in the local-PC or network
archive location.
3. Select the appropriate category to view information.
4. The Audit Log lists instrument status and activity. To meet 21 CFR Part 11 validation
requirements, Progeny Analyzers automatically save instrument status and activity data for all
users. To view logged data select Audit Log.
a. The icons near the top of the screen show audit log data in the following categories: all
data , User related actions , Application related actions , Library related actions
, stored results
b. Tap the desired icon to display that category of log data.
c. Scroll down the list to locate the action for which you need to view log data.
5. Select the Cancel soft key to return to the Main screen.
Viewing Diagnostics Data
Instrument-specific Diagnostic data is available for monitoring the instrument’s internal temperature,
available power, laser usage data and scans taken and archived for maintenance and troubleshooting.
1. From the Main screen select (Settings) to display the Instrument Settings screen.
2. From the list of Instrument Settings categories, select (Diagnostics) to display the
Diagnostics screen showing instrument-specific diagnostics (Figure 28).