4.6 Parameter Setting Method
For this instrument, you can use the knob and touch screen to set parameters. The
common parameter setting methods are as follows:
• Method 1: Some parameters can be adjusted by rotating the knob on the front
panel.
• Method 2: Click or tap the input field of a specified parameter, then a virtual
keypad is displayed. Complete the parameter setting with the keypad.
Input Chinese and English Characters
When naming a label, this instrument supports Chinese/English input method. The
following part introduces how to input Chinese and English characters with the
Chinese/English input method.
• Input English Characters
Uppercase/Lowercase Switchover Name Input Area Virtual Keypad
Backspace Key
Confirm InputSpace Key
Switch to Numbers
And Symbols
Input Method
Switchover
Figure 4.16 English Input Interface
1. Select English input method
First check the input method type. If it shows "En/ä¸", then go to Step 2; if it
shows "ä¸/En", click or tap the input method switchover key to switch to "En/
ä¸" (English input method).
2. Clear the name input area
If there is no character in the "Name Input Area", please go to the next step. If
there are characters in the "Name Input Area", click or tap the Backspace key
to delete all the characters from the "Name Input Area" in order.
Quick Start
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. DHO800 User Guide
29
To Next Page
Loading...
Need help?
General
