Rigol DM3000 Series User Manual

RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 2-51
User Manual for DM3000 Series
External trigger
The multimeter receives a trigger source from the rear external “Ext Trig” Under the
External trigger mode.
Once under the External trigger mode the other trigger manner are prohibited
automatically.
Manua trigger
Press under the Manua trigger mode to obtain continuous data.
The default trigger mode is Manua trigger which has been set before leaving the
factory.
start delay
The start delay time refers to the latency time from when the first sample finished to
the second sample start.
Press Æ Log Æ Start Æ Delay, enter the interface shows below.
Figure 2-61
The menu of start manner interface
Table 2-37 The start delay menu explanation
Function
Menu
setting Explanation
The set
value
The default value of delay time is 0s, use the
direction key to set the time you need.
Save all the changes, back to a higher level
menu.

Rigol DM3000 Series Specifications

General

Brand	Rigol
Model	DM3000 Series
Category	Multimeter
Language	English