RIGOL
1-26 © Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
4. Lead test leads into circuit, starts to check.
Figure 1－32
Frequency Test instruction chart
5. Measurement history data processing
Press History , enter the menu shown below:
Figure 1-33
To check or save the data that has measured by current measurement function,
you can use the history function. In this function you can get the “Info” (information),
“List” and “Graph” of this measurement. Also, you can save this information data
with pressing the Save softkey.
AC Signal
To Next Page
Loading...
