Rigol DM3000 Series User Manual

RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 1-27
User Manual for DM3000 Series
Period Test
Figure 1-34
Table 1-10 Period Test characteristics
Range
200mV、2V、20V、200V、750V
Measurement Range
0.33s～3.3us
Input Signal Range 100mVAC~750VAC
Import Protection 750VRMS on all ranges (HI Terminal)
Configurable Parameters Null value
Basic measurement:
1. Connect test leads as Figure 1-35 shown. Red test lead connects the HI Terminal,
Black test lead connects the LO Terminal.
2. Press twice to select the Period Test.
3. Set the Null value
Null computing will be an optional operation, could be setup in accordance with
users’ demand. If user does not implement Null computing, this parameter is not
required, direct implementation of the next step.
(To know the specific setting methods of the Null value setting, please refer to
Chapter 2 “To Set Up Measurement Parameters”, Null computing)

Rigol DM3000 Series Specifications

General

Brand	Rigol
Model	DM3000 Series
Category	Multimeter
Language	English