Rigol DM3000 Series User Manual

RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 2-3
User Manual for DM3000 Series
Continue Resistance
To set up the continue resistance value in the short test, when the test resistance
below the continue resistance value, the DM3000 will judge whether the circuit is
connected or not. The continue resistance is only using at Continue Test.
Press Æ Conti , enter the menu shown below:
Figure 2-2
Use direction keys to change the parameter values:
Press left and right key to choose different digits. Press up and down key to change
the current digital value.
Continue Resistance
The range of continue resistance is 1Ω~1000Ω. The default value is 10Ω.
The continue resistance stored in the easy-lost memorizer, the resistance still keep
when the power is off.

Rigol DM3000 Series Specifications

General

Brand	Rigol
Model	DM3000 Series
Category	Multimeter
Language	English