Rigol DM3000 Series User Manual

RIGOL
2-4 © Copyright RIGOL Technologies, Inc. 2007.
User Manual for DM3000 Series
AC Filter
There are three kinds of AC Filter. Choose correct filter may make the measurement
more accuracy. This function could only be used in AC Voltage and AC Current
measurement.
Press Æ Filter , enter the menu shown below:
Figure 2-3
Table 2-3 AC Filter Menu Explanation
Function Menu Explanation
Slow Set up the filter with low speed
Mid Set up the filter with to middle speed
Fast
Set up the filter with high speed
Save all changes, back to a higher level menu
Table 2-4 AC Filter Parameters Characteristics
AC Filter Options Input Frequency Setting Timer
Slow
3Hz～300kHz
1.2 reading/s
Mid
20Hz～300kHz
0.5 reading/s
Fast
200Hz～300kHz
0.3 reading/s
AC Filter
The AC Filter Parameters are saved in the volatile memory, the data will lose when
the power is off.
The default value of AC Filter Parameters is “Mid”(middle)

Rigol DM3000 Series Specifications

General

Brand	Rigol
Model	DM3000 Series
Category	Multimeter
Language	English