RIGOL
© Copyright RIGOL Technologies, Inc. 2007. 2-89
User’s Guide for DS1000 Series
NOTE:
1. The corresponding block on the screen will tem porary turn into green (Color
models) or white (Mono models) when pressing a key.
2. The blocks will reverse its color to red (Color models) or black (Mono models)
when the corresponding key or knob get pressed, and the color will keep
reversed during the test.
3. Key backlight lamps will be lit one by one to determine if every backlight LED
works well.
3. You could follow the prompting message of " <<Press RUN ’ Key Three Times to
Exit the Test>>" to exit the test.
To Next Page
Loading...
